Specifications

Spindle Size: 4.3″
X-Horiz Tvl of Table: 100″
Y-Vert Tvl of Head: 80″
Power: 40 hp
RPM: 4,000 RPM
Table-W: 55.1″
Table-L: 71″
Spindle Tvl.: 60″
Control: CNC (TOSNUC 888.2)

QUOTATION
NASH TOOL & MACHINE SUPPLY, INC.
22701 Nagel St, Warren, MI 48089 (Detroit suburb)
phone (586) 914-4478 [email protected]
www.nashmachinery.com

TOSHIBA BTH 110 R18 “HI CUBE” CNC HORIZONTAL BORING MILL
FEATURES TOSNUC 888.2 CONTROL, 38 ATC, 4000 RPM SPINDLE, AND 0.0001 DEGREE TABLE INDEXING
Serial number 144857; new 2006

Catalog specifications subject to revision;

Machine Specifications BTH-110.R18
Travel X-axis travel (Cross movement of table) mm (in) 2 500 (100)
Y-axis travel (Vertical movement of spindle head) mm (in) 2 000 (80)
Z-axis travel (Longitudinal movement of column) mm (in) 1 500 (60)
W-axis travel (Spindle extension) mm (in) 500 (20)
Distance from table surface to spindle center mm (in) 0 to 2 000 (0 to 80)
Distance from table center to milling spindle gauge plane mm (in) 600 to 2 100 (23.6 to 82.7)
Table Table working surface mm (in) 1 400 x 1 800 (55.1 x 70.9)
Table loading capacity kg (lbs) 10 000 (22 000)
Table surface configuration (Pitch to T-slots 160 mm, size 22 mm 9 T-slot
Minimum table indexing angle (B- axis) degrees 0.0001
Spindle Spindle diameter mm (in) 110 (4.3)
Spindle speed range min-1 6 to 4 000
Milling spindle nose diameter mm (in) 225 (8.8)
Type of spindle taper 7/24 taper No.50
Feedrate Rapid traverse rate X, Y Z mm/min (ipm) 18 000 (708.7)
W mm/min (ipm) 6 000 (236.2)
B deg/min 720
Feedrate mm/min (ipm) 1 to 10 000 (0.04 to 393.7)
Automatic tool changer (ATC) Type of tool shank MAS BT50
Type of retention knob MAS P50T-1
Tool storage capacity 38 tools
Maximum tool diameter When adjacent pots are occupied mm (in) 125 (4.92)
When adjacent pots are empty mm (in) 240 (9.44)
Maximum tool length mm (in) 400 (15.74)
Maximum tool mass kg (lbs) 25 (55)
Tool selection Pot address random short-cut
Spindle drive motor (30 min./cont. rating) kW (HP) AC30/22 (40/30)
Power source Electric power supply AC200/220V +/-10%, 50/60Hz +-2%
Power Capacity kVA 80
Compressed air supply Pressure MPa 0.5 to 0.8 (72.5 to 116)
Flowrate NI/min 900
Machine size Machine height mm (in) 4 590 (181)
Floor space mm (in) 5 990 x 5 990 (236 x 236)
Mass of machine (including NC equipment) kg (lbs) 30 000 (66 000)
Accuracy Positioning accuracy X, Y, Z mm/min (ipm) +/-0.008/full length (+/-0.00032/full length)
W mm/min (ipm) +/-0.010/full length (+/-0.00040/full length)
Repeatability X, Y, Z mm/min (ipm) +/-0.004 (+/-0.00016)
W mm/min (ipm) +/-0.006 (+/-0.00024)
Table indexing accuracy (arbitrary angle) sec +/-3
Table indexing repeatability (arbitrary angle) sec +/-1.5